CHAIN SAW NAMES AND TERMS

Continued

Replacement Chain Chain that complies with ANSI B175.1 when used with a specific saw. It may not meet ANSI requirements when used with other saws.

Saw Chain (Chain) Loop of chain having cutting teeth for cutting wood. The motor drives chain. The guide bar supports chain.

Spiked Bumper (Spike) Pointed teeth at front of saw body beside guide bar. Keep spiked bumper in contact with wood when felling or bucking. It helps maintain position of saw while cutting.

Sprocket Toothed wheel that drives chain. Switch Device that completes or interrupts electrical circuit to motor of saw.

Switch Linkage This device connects switch to trig- ger. It moves switch when you squeeze trigger. Switch Lockout Device that reduces accidental starting of saw.

Trigger Device that turns saw on and off. Squeezing trigger turns saw on. Releasing trigger turns saw off. Trimming (Pruning) Process of cutting limb(s) from a living tree.

Undercut An upward cut from underside of log or limb. This is done while in normal cutting position and cutting with top of guide bar.

ASSEMBLY

Note: Some models are pre-assembled. Assembly is not needed on these models.

See Saw Chain Tension Adjustment, pages 16 and 17.

WARNING: Cutting edges on chain are sharp. Use protective gloves when handling chain.

IMPORTANT: Do not clamp chain saw in vise during assembly.

The plastic hardware bag should include:

•two guide bar bolts

•two guide bar nuts

•one Phillips-head tapping screw

1.Lay chain out flat.

2.Install front hand guard onto saw body. Do this by pressing two mounting stand-outs on hand guard into hex-shaped holes in saw body (see Figure 3).

3Insert tapping screw through hand guard and into saw handle. Tighten screw firmly.

4.Turn adjusting screw counterclockwise (see Figure 4). Continue to turn adjusting screw until adjusting block is to rear of adjusting plate.

5.Install guide bar onto saw body. Place rear of guide bar between adjusting plate and sprocket support.

IMPORTANT: Make sure to insert adjusting block into oval adjusting hole on guide bar.

6.Line up holes on sprocket support with center slot on guide bar and holes in saw body.

7.Insert guide bar bolts through front hand guard, saw body, center slot of guide bar, and sprocket support. Attach guide bar nuts to guide bar bolts.

IMPORTANT: Tighten guide bar nuts finger tight only. Make sure adjusting block is in oval adjusting hole on guide bar.

8.Place chain around drive sprocket, then along top groove of guide bar and around guide bar nose. Note: Make sure cutting edges of chain are facing the right direction. Position chain so cutting edges on top of guide bar face guide bar nose (see Figure 3).

CAUTION:Do not place chain on saw backwards. If chain is backwards, saw will vibrate badly and will not cut.

9.Adjust saw chain tension. Follow steps under Saw Chain Tension Adjustment, pages 16 and 17.

SAW CHAIN TENSION ADJUSTMENT

WARNING: Unplug chain saw from power source before adjusting saw chain tension.

WARNING: Cutting edges on chain are sharp. Use protective gloves when handling chain.

WARNING:Maintain properchain ten- sion always. A loose chain will increase the risk of kickback. A loose chain may jump out of guide bar groove. This may injure operator and damage chain. A loose chain will cause chain, guide bar, and sprocket to wear rapidly.

Note: For pre-assembled models, the saw chain tension is properly set at factory. A new chain will stretch. Check new chain after first few minutes of operation. Allow chain to cool down. Follow steps below to readjust saw chain tension.

1.Before adjusting chain, make sure guide bar nuts are only finger tight (see Figure 3). Also make sure adjusting block is in oval adjusting hole on guide bar (see Figures 3 and 4).

www.desatech.com

16

108539

Page 15 Page 17
Page 16
Image 16
Remington 104316-04, 104316-05, 106890-01, 106890-02, 108526-01, 104317, 106821, 106821A owner manual Assembly
Page 15 Page 17

104316-04, 104316-05, 106890-01, 106890-02, 108526-01, 104317, 106821, 106821A specifications

The Remington 104316-04, 104316-05, 106890-01, 106890-02, 108526-01, 104317, 106821, and 106821A represent a diverse range of high-quality grooming tools designed to cater to various personal grooming needs. Each model boasts unique features and technologies ensuring optimal performance.

The Remington 104316-04 and 104316-05 are similar models that excel in hair cutting performance. Both are equipped with precision-ground stainless steel blades that provide a clean, sharp cut. The adjustable taper lever allows for easy length customization, making them perfect for various hairstyles. Additionally, they feature a powerful motor for smooth operation and come with multiple attachment combs for added versatility.

The Remington 106890-01 and 106890-02 are designed specifically for beard grooming. These trimmers utilize advanced self-sharpening stainless steel blades that maintain their edge over time, reducing the need for frequent replacements. An ergonomic design ensures a comfortable grip, enhancing control during use. Both models also offer adjustable length settings, enabling users to achieve the desired beard style with precision.

Moving on, the Remington 108526-01 is geared towards body grooming. It features a versatile trimming head that is safe for use on sensitive skin areas. The hypoallergenic blades minimize the risk of irritation, making it suitable for all skin types. Additionally, this model is waterproof, allowing for convenient use in the shower and easy cleaning afterward.

The Remington 104317 is a dedicated nose and ear hair trimmer designed with safety and ease of use in mind. Its rotary cutting system ensures smooth and efficient trimming without tugging or pulling. The compact design and built-in safety features make it user-friendly, allowing for quick touch-ups.

Finally, the Remington 106821 and 106821A are innovative grooming systems that feature advanced technologies such as a turbo boost function for tackling thicker hair easily. Both models come with a range of attachments suitable for various grooming needs, from hair cutting to edging and detail work. The rechargeable battery ensures long-lasting performance, while the LED indicators provide real-time feedback on battery life.

Overall, these Remington products combine cutting-edge technologies with thoughtful design elements to enhance the grooming experience, catering to a wide array of user preferences and needs. Whether it's for hair cutting, beard trimming, body grooming, or detail work, Remington delivers quality and versatility across its product lineup.
Top Page Image Contents