IMPORTANT SAFETY INFORMATION

WARNING: When using an electric chain saw, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

READ ALL INSTRUCTIONS.

Make sure you read and understand all in- structionsinImportant Safety Information on pages 2 through 4.Improper use of this chainsawcancausesevereinjuryordeath from fire, electrical shock, body contact with moving chain, or falling wood.

BEFORE OPERATING SAW

1.Read and understand this owner’s manual before operating chain saw.

2.Watch what you are doing. Use common sense. Do not operate saw when you are tired.

3.Use chain saw for cutting wood only. Do not use chain saw for purpose not intended. Do not use for cutting plastic, masonry, etc.

4.Only well-instructed adults should operate chain saw. Never allow children to operate chain saw.

5.Use only electrical voltage noted on model plate of chain saw.

6.Use only extension cords marked for outdoor use. See page 17 for extension cord requirements.

7.Do not operate chain saw

•while under the influence of alcohol, medica- tion, or drugs

•in rain or in damp or wet areas

•where highly flammable liquids or gases are present

•if saw is damaged, adjusted wrong, or not fully and securely assembled

•if trigger does not turn saw on and off. Chain must stop moving when you release trigger. Have faulty switch replaced by authorized ser- vice center (see Technical Service, page 21).

•while in a hurry

•while in tree or on a ladder unless trained to do so

8.Wear snug-fitting clothes when operating chain saw. Do not wear loose clothing or jewelry. They can get caught in moving saw chain.

9.Wear the following safety gear when operating chain saw.

•heavy-duty gloves (wear rubber gloves when working outdoors)

•steel-toed safety footwear with non-skid soles

•eye protection such as safety glasses, goggles, or face screen

•safety hard hat

•ear mufflers or ear plugs

•hair covering to contain long hair

•face or dust mask (if working in dusty areas)

10.Before cutting, always provide the following:

•clear work area

•secure footing

•planned retreat path from falling tree

11.Inspect tree before cutting down. Make sure there are no dead limbs or branches that may fall on you.

12.To reduce the risk of electric shock, this saw has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet of your extension cord, reverse the plug. If it still does not fit, a polarized extension cord will be necessary. Do not change the plug in any way.

WHILE OPERATING SAW

1.Stay alert. Use common sense while operating chain saw.

2.Keep work area clean. Cluttered areas invite injuries.

3.Be aware of extension cord while operating chain saw. Be careful not to trip over cord. Keep cord away from chain and operator at all times.

4.Keep children, animals, and bystanders away from chain saw and extension cord. Only chain saw user should be in work area.

5.Do not cut down a tree unless you are trained or have expert help.

6.If two or more persons perform bucking and fell- ing operations at the same time, provide plenty of distance between operations. Provide distance of at least twice the height of tree being felled.

7.Secure wood you are cutting by using clamps or chocks.

8.Grip chain saw firmly with both hands. Never operate chain saw with one hand. Never use hand guard as handle.

9.Keep finger off trigger until ready to make cut.

10.Before starting chain saw, make sure chain is not touching anything.

11.To guard against electrical shock, avoid body contact with grounded objects such as pipes, fences, and metal posts.

12.Keep all parts of body away from chain when saw is running.

13.Do not force chain saw while cutting. Apply light pressure. It will do the job better and safer at the rate for which it was intended.

14.Cut small brush and saplings with extreme care. Slender material may catch in chain and be whipped toward you. This could also pull you off balance.

15.When cutting limb or tree trunk that is under tension, use extreme caution. Be alert for wood springing back. When wood tension is released,

www.desatech.com

2

108539

Page 1 Page 3
Page 2
Image 2
Remington 104316-04, 104316-05, 106890-01, 106890-02, 108526-01, 104317, 106821, 106821A Important Safety Information
Page 1 Page 3

104316-04, 104316-05, 106890-01, 106890-02, 108526-01, 104317, 106821, 106821A specifications

The Remington 104316-04, 104316-05, 106890-01, 106890-02, 108526-01, 104317, 106821, and 106821A represent a diverse range of high-quality grooming tools designed to cater to various personal grooming needs. Each model boasts unique features and technologies ensuring optimal performance.

The Remington 104316-04 and 104316-05 are similar models that excel in hair cutting performance. Both are equipped with precision-ground stainless steel blades that provide a clean, sharp cut. The adjustable taper lever allows for easy length customization, making them perfect for various hairstyles. Additionally, they feature a powerful motor for smooth operation and come with multiple attachment combs for added versatility.

The Remington 106890-01 and 106890-02 are designed specifically for beard grooming. These trimmers utilize advanced self-sharpening stainless steel blades that maintain their edge over time, reducing the need for frequent replacements. An ergonomic design ensures a comfortable grip, enhancing control during use. Both models also offer adjustable length settings, enabling users to achieve the desired beard style with precision.

Moving on, the Remington 108526-01 is geared towards body grooming. It features a versatile trimming head that is safe for use on sensitive skin areas. The hypoallergenic blades minimize the risk of irritation, making it suitable for all skin types. Additionally, this model is waterproof, allowing for convenient use in the shower and easy cleaning afterward.

The Remington 104317 is a dedicated nose and ear hair trimmer designed with safety and ease of use in mind. Its rotary cutting system ensures smooth and efficient trimming without tugging or pulling. The compact design and built-in safety features make it user-friendly, allowing for quick touch-ups.

Finally, the Remington 106821 and 106821A are innovative grooming systems that feature advanced technologies such as a turbo boost function for tackling thicker hair easily. Both models come with a range of attachments suitable for various grooming needs, from hair cutting to edging and detail work. The rechargeable battery ensures long-lasting performance, while the LED indicators provide real-time feedback on battery life.

Overall, these Remington products combine cutting-edge technologies with thoughtful design elements to enhance the grooming experience, catering to a wide array of user preferences and needs. Whether it's for hair cutting, beard trimming, body grooming, or detail work, Remington delivers quality and versatility across its product lineup.
Top Page Image Contents