Baby Trend Latch-Loc, Flex-Loc
Please follow the following instructions for proper installation of your infant car seat.
Installation of the Baby Trend® | BT BAR | |
Seat | ||
| ||
1. Remove (unscrew) the Snap Bar from the Snap N Go attachment. |
| |
2. With one hand grasp the car seat handle (in its upright, carrying |
| |
position) and gently place the seat, so that the baby faces the rear |
| |
of the Stroller, onto the | Position “4” | |
large groove on the seat bottom, nearest the | ||
| ||
hooks over the BT Bar. |
|
3.Feed the Car Seat Straps through the auto belt slots on the infant car seat and snap the two buckles together (see Figure 2). The first time you do this, you will need to adjust the length of the strap
for a tight fit around the car seat. FOR SAFE OPERATION, IT
IS VERY IMPORTANT THAT THE CAR SEAT STRAP IS
ALWAYS TIGHTLY FASTENED OVER THE CAR SEAT.
4. Test for secure installation by moving the car seat in all directions. |
|
The car seat should be securely attached to the stroller. | Figure 1. |
|
Removal of the Baby Trend® Latch-Loc® Infant Car Seat
1. Unlock the Car Seat Strap and remove from over the infant car seat.
2. With one hand, grasp the car seat handle (in its upright, carrying position) and with your other hand squeeze the handle on the footend of the car seat and lift the car seat upward from the Snap-
Figure 2.
Cosco®, Peg Perego®, Primo Viaggio®, Evenflo®, Cozy Carry®, On my Way®, Embrace®, |
|
Century®, Vante®, Graco®, Cosco® Arriva® and Snug Ride® are the trademarks of their owners. |
|
They are not associated with Baby Trend, Inc. and no approval or endorsement is implied. | 19 |
|
