6. To attach the front child tray, push the tray onto the front frame tube, lining up the tray between the protruding rivets. Push backward on the latch until snapped into place. The protruding rivets on the outside of the frame tube should be between the tray latch. Check that the tray is securely latched in place. Please see figure 5 and 6.
7. To remove front child tray, pull outward on the latches and pull outward on the tray. Please see figure 7. Please note that you may attach or remove one end at a time.
WARNING: The child’s tray is not a restraint device: always secure your child with the seat belt. DO NOT lift the stroller by the child’s tray. Use care when attaching the child’s tray on the stroller with a child in the stroller.
8.To attach the front canopy, line up the male fittings on the canopy with the female fittings on the armrest and push both fittings downward until snapped into place. Please see figure 8. Push forward on the front edge of the canopy to open.
9.To attach the rear canopy line up the female fittings of the canopy with the male fittings on the handle frame tube and push downward. Please see figure 9.
10.To remove rear canopy reverse installation steps and pull up to remove.
Please see figure 9A.
11.To remove front canopy depress the plastic attachment and pull upward to remove. Please see figure 9B.
Fig. 9A. | Fig. 9B. |
Fig. 5.
Rivet
Fig. 6.
Fig. 7.
Fig. 8.
Fig. 9.
4
