Baby Trend 7581 To Attach An Infant Car Seat, Do Not allow children near stroller while unfolding

Models: 7581

1 8
Download 8 pages 36.24 Kb
Page 8
Image 8
Do Not allow children near stroller while unfolding.

TO UNFOLD STROLLER

Do Not allow children near stroller while unfolding.

1. Release the folding latch, which is located on the right side. See figure 22.

2. Lift up on the stroller handle with both hands until the stroller frame is erect and locked in the open position. The stroller has spring-loaded latches on both sides of the frame. Test that both latches are fully engaged prior to placing your child in the stroller.

TO ATTACH AN INFANT CAR SEATWARNING: Avoid serious injury from falling, Do Not use the Snap N Go bar if it is not securely locked onto both sides of the stroller.

TO ATTACH AN INFANT CAR SEAT

1.Recline the front seat back. Remove the child tray.

2.Slide snap n go attachment bar into the female slots located on the frame tube. Make sure the snap n go attachment bar locks in place before attaching the car seat. See figure 23.

3.Place car seat onto front bar. See figure 24. NOTE: Most brands of infant car seats will lock onto the front bar, and some brands may simply rest on the front bar, FOR SAFE OPERATION, IT

IS VERY IMPORTANT THAT THE CAR SEAT STRAP IS ALWAYS TIGHTLY FASTENED AROUND THE CAR SEAT.

4.Strap the safety belt over the car seat and through the seat belt slots on your car seat, connect the buckles together. Tighten the strap so the car seat fits snug and can't move. See figure 24. Check that the car seat is secure before using the stroller.

Fig. 23.

Fig. 24.

STOP

IF YOU EXPERIENCE ANY DIFFICULTY IN USING THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT AT (800) 328-7363 BETWEEN THE HOURS OF 8:00AM AND 4:30PM PACIFIC COAST TIME FOR ASSISTANCE.

8

Page 8
Image 8
Baby Trend 7581 manual To Attach An Infant Car Seat, Do Not allow children near stroller while unfolding, Stop