ASSEMBLY INSTRUCTIONS
Adult Assembly Required
Save these instructions for future use
BEFORE YOU BEGIN ASSEMBLY:
Ensure that all the parts and hardware listed are included. If anything is missing or not satisfactory
contact Badger Basket for assistance. Read all instructions before beginning so you’ll be
familiar with the parts and their final positions.
MODEL #09510 ~ Cover for Cedar Sandbox (4’ x 6’)
(Leaps and Bounds® #12957)
TOOLS NEEDED:
Pliers
PARTS INCLUDED:
(A)1 - Cover with 12 Attached Snap Hooks
(B)12 - Eye Hook Screws
Remember, children should always wash their
hands thoroughly with soap and water after playing
in the sandbox, especially before handling snacks or meals.
The cover can be installed by one person.
However, it is helpful to have one or two other people helping to ensure you position the hooks where you want them so the cover is taut and even.
STEP 1: See PICTURES 1 AND 2. Unfold the cover and lay it over the sandbox. One at a time, screw the eye hooks into the sides of the sandbox. The eye hooks may screw in easily without using tools. If a tool is needed, you can turn them with a pair of pliers. Do not rush. Work carefully to position each hook. Start with one corner, then do the corner diagonal to the first corner, and then complete the other two corners before doing the last four hooks. When the cover is attached, you want it to be taut, but not so taut that the fabric is stressed. If the fabric is too loose, rainwater and debris will pool on top of the cover.
Attach the hooks onto the eye hooks all the way around the cover to secure the cover in place. Simply undo the hooks to remove the cover when you want to use the sandbox. The loose ties at one end of the cover can be used to roll it up and tie it.
This sandbox cover is not designed to bear the weight of children or large animals. Do not let children crawl or walk around on the cover or jump on it. This will tear the fabric and/or the attachments and void any return policy or warranty offered on this item.
PICTURE 1 | PICTURE 2 |
BADGER BASKET CO: | Manufactured Exclusively for: |
|
TOLL FREE: | Leaps and Bounds® |
|
www.badgerbasket.com/parts | 2.0/1108/TG |
