Sandwich MerchandiserMaintenance
Troubleshooting
Problem | Cause | Possible Solution |
|
|
|
Unit will not turn on. | Power cords not | Make sure power cords are connected and circuit |
| connected or circuit | breaker is on. If problem persists contact a |
| breaker supplying power | licensed electrician. |
| to the unit has tripped. |
|
Product is not holding it’s | Product temperature is | Make sure product is above 160° F when loaded. |
temperature | too low when loaded. |
|
| Or |
|
| Faulty component in | Contact an authorized BKI service agent for |
| heating circuit | corrective action. |
|
|
|
Unit is not heating | No power to unit | Make sure power cords are connected and circuit |
|
| breaker is on. If problem persists, contact licensed |
|
| electrician. |
| Or |
|
| Faulty component in top | Contact an authorized BKI service agent for |
| or bottom heating circuit. | corrective action. |
|
|
|
Repair
Before replacing any parts, make sure the power has been turned off and the unit has cooled down.
Lamp Replacement
Only use
1.Remove power from the unit by following the shutdown procedures in the Operation section.
2.Allow the equipment to cool to room temperature.
3.Remove lamp guard.
4.Carefully remove the faulty lamp.
5.Replace with the new lamp and reattach the lamp guard.
13