Rotisserie Ventless Hood | Operation |
Preparation
The following conditions must be met for the Filter Hood to function:
•The charcoal odor filter must be installed.
•The grease baffle must be installed.
•The filters door and hood doors must be shut.
•Power must be supplied to the hood from the VGG.
Start-Up
To start the Filter Hood, press the power “On / Off” rocker switch button to position I.
Shut-Down
Power to the appliance is turned off, when the hood is turned off.
For proper operation, always turn off appliance and allow time for it to cool before turning off the filter hood. This will insure proper capture of grease vapors.
To stop the Filter Hood, press the power “On / Off” rocker switch button to 0.
When to Replace the Filter
The vacuum switch is designed to monitor the level of negative/static pressure created by the blower. When the charcoal filter is approximately 70% dirty, the “Replace Filters” pilot light illuminates. This light is
10
