To fasten the wall bracket
1Fold the cardboard ‘tool’ as shown, and attach it to the wall bracket.
2Hold the wall bracket against the wall – centred below the tele vision screen. Make sure that the ‘tool’ touches the screen edge.
3Mark up on the wall where to drill the holes.
4Drill the holes in the wall, and insert the appropriate wall anchors.
5Fasten the wall bracket to the wall using the appropriate size and type of screws and washers.
The holes in the wall bracket allows for some adjustment. Make sure that the wall bracket is in the correct position – level and centred in the correct distance from the screen edge. Then fully tighten all the screws.
62 mm |
2.44" |
Cardboard ‘tool’: The ‘tool’ is used as a help to position the wall bracket in the correct distance from the lower edge of the television screen.
