Bang & Olufsen 10 manual To attach the loudspeaker front panel

To attach the loudspeaker front panel

1 Insert all the little pegs on the rear side of the panel into the corresponding holes in the loud­ speaker cabinet.

2Make sure that all the pegs are firmly seated into the holes.

When finished, the loudspeaker front panel must be aligned with the front of the television screen. If it apppears not to be so, remove the loudspeaker front panel again, and adjust the front-to-back position of the loudspeaker.

To remove the front panel, for example for cleaning, just pry the little pegs free from the loud­ speaker cabinet.

× 2



Cover plates: If your loud¬speaker is set up beneath a 65-inch screen, fasten two cover plates to the wall bracket – one on each side of the bracket.