Bang & Olufsen 10 manual To fasten the loudspeaker

 >> Set up the loudspeaker – wall bracket

To fasten the loudspeaker

Attach the television screen and loudspeaker cables to the wall bracket before you fasten the loud­ speaker. Use the small cable clamps provided.

–Connect the cables to the loud­ speaker and hang it on the wall bracket by inserting the three struts into the corresponding holes in the loudspeaker cabinet.

–Adjust the loudspeaker position on the wall bracket. The correct position is obtained when the front of the loud¬speaker cabinet falls 13 mm (0.51") ‘behind’ the front of the television screen.

–Tighten the screws at the end of all three struts – in order to lock the loudspeaker position onto the wall bracket.

13 mm

0.51"

13 mm

0.51"

Loudspeaker position: The wall bracket allows you to adjust the loud­ speaker front-to-back position for use with different television screen sizes. For safety reasons, it is important that you lock the loudspeaker onto the wall bracket!