7
Connection to BeoVision 7 …
Connect the loudspeaker to one of the Power Link sockets on the left BeoVision 7 socket panel.
For further information about the BeoVision 7 socket panels, refer to the Guides enclosed with the product.
Connection to other Bang & Olufsen systems …
Use a Power Link cable of the correct type to connect the loud- speaker to a Power Link socket on the Bang & Olufsen system.
For further information, refer to the Guide enclosed with the Bang & Olufsen system.
BeoVision 7
BeoLab 7
The two mains cords and the Power Link cable are enclosed with BeoVision 7.
Power Link
Mk 3
Cable clamp: For safety reasons, the mains cord from the wall outlet must be secured to the loudspeaker. To do so, tug the cord behind the clamp.
Power Link cable: Do not use a cable of the older type, as this will cause noise, and therefore not give optimum sound quality! The new type has a triangular mark on the plug.
