6 | Cable connections |
The loudspeaker is primarily intended to be used in a setup with BeoVision 7*. It may, how- ever, be used with other Bang & Olufsen systems as well – for example in a BeoVision 4 setup.
If used in a setup not including BeoVision 7, you will require a mains cord and a Power Link cable. These cables are available as optional accessories from
Mains connection |
|
to BeoVision 7 | POWER LINK |
| |
| socket |
POSITION switch | Cable clamp |
The socket panel is located on the rear of the loudspeaker.
your Bang & Olufsen retailer.
Mains connections
The loudspeaker has two sockets concerning mains supply.
The socket marked ~ is for mains supply input (connection from the wall outlet), and the other is a mains supply output to BeoVision 7 (this socket is not available on loud- speakers intended for the US- market).
Note: The mains cord from the wall outlet must be fastened to the cable clamp on the loudspeaker – as shown on the next page.
POSITION switch
This switch has two settings: F
Which setting to use is explained in ‘Adapt the loudspeaker to your room’ (pp.
POWER LINK socket
Use this socket to connect the loud- speaker to one of the Power Link sockets on the Bang & Olufsen system – see the next page.
*NOTE! BeoVision 7 and its accessories are not available on all markets.
