SWITCHBOARD
If your BeoCom 2500 is connected to a switchboard you have to store the switchboard code in order to ensure correct function of the operator code.
As well, it is often necessary to enter a pause between the switchboard code and the telephone number.
BeoCom 2500 inserts this pause auto- matically when it is once stored into the telephone together with the switchboard code.
If the
TO STORE THE SWITCHBOARD CODE
Press Menu, XMENU *
< SETUP MENU >
Press | Enter | SETUP MENU |
| |
| > until SWITCHBOARD | < PRESET VOLUME> | ||
Press | is shown in the display | |||
Press | Enter | SWITCHBOARD |
| |
| < > until YES is shown | < | NO | > |
Press | in the display |
| ||
Press | Enter | SWITCHBOARD |
| |
Enter | the code | CODE: _ |
| |
Press | Enter | PAUSE |
|
|
|
| < | WAIT | > |
Press < > to select the pause required*)
Press EnterSTORED SWITCHBOARD
*) The pause between the prefix and the telephone number can be set from one to twelve seconds or you can enter a stop (WAIT or NO DELAY).
