Bang & Olufsen DVBT/S manual Daily use

4 Daily use

When your television is equipped with the DVB–T/S Module, you can receive digital satellite and terrestrial programmes.

The Beo4 remote control gives you access to all functions of your television. However, only the functions relevant to the module are explained here, for further information about operating your television, refer to the televisions own Guide.

TV	LIGHT	RADIO
DTV	DVD	CD
V MEM	RECORD	A MEM

	7			8		9
	4			5		6
1		2			3
			0
	TEXT					MENU

GO

LIST EXIT

STOP

The Beo4 display shows the source you have selected, or extra functions available when you press the LIST button.

DTV Switch on your television and activate the DVB–T/S module

0 – 9 Select channel or station numbers or menus, or enter numbers in menus

TEXT Bring up teletext, if provided by the channel you are currently watching

MENU Bring up the DVB–T/S menu overlay as described on the next page. Press twice to bring up the TV menu

Step between channels or stations or move cursor up or down in menus

Move cursor left or right or see available options in menus. While DTV is selected as source, you can use the buttons to step between your Channel/Station Groups and the Channel/Station Lists

GO Select and activate a function or confirm a choice in a menu. Press and hold while watching television via the DVB–T/S module to bring up a Channel/Station List

STOP Back up through menus

EXIT Exit menus or, for example, teletext

The coloured buttons are used as “short cuts” to functions as described on the next page, or used as indicated in the DVB–T/S menus

NOTE! Depending on your Beo4 version, the ‘DTV’ button may be named ‘SAT’ instead. These buttons have the same function.