Data Capture
for Workforce
in Motion
6.5 Data format
The data format is the following:
Nature |
| Data | Capture | Symbology | AIM/Protocol | Barcode / | Symbology | Capture | Data | |
of | Timestamp | /ProtocolPrefix | RFID TagID | /ProtocolSuffix | ||||||
Prefix | Prefix | Identifier ** | Suffix | Suffix | ||||||
data* |
| *** | data | *** | ||||||
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| |
1 byte | 12 bytes | 0, 2 or 3 bytes | - | |||||||
| bytes | bytes | bytes | |||||||
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
Nota :
*: Nature Of Data byte is available only for DualRunners scanner (to identify if data is RFID TagID or Barcode), by default this field is disabled.
** : These fields can be Symbology AIM if captured data is Barcode and RFID Protocol identifier if captured data is RFID TagID.
*** : These fields can be Symbology prefix/suffix if captured data is Barcode and RFID Protocol prefix/suffix if captured data is RFID TagID.
6.5.1 Baracoda Header
It is a proprietary data encapsulation. It is necessary to activate the Baracoda header in 2 cases:
∙to use the Baracoda keyboard emulation (Kemul) and Terminal.
∙to use the “No data loss” mode.
You can configure Baracoda Header through BaracodaManager software.
The Baracoda header is enabled in default settings.
6.5.2 Timestamp
Timestamp can be configured (ON/OFF, synchronise new time) by BaracodaManager software and by configuration barcodes.
Timestamp will be in the following format: YYMMDDhhmmss:
YY: YEAR | MM: MONTH DD: DAY | hh: Hours | mm: Minutes ss: Seconds |
6.5.3 General Prefix / Suffix
A prefix and/ or suffix can be added to every barcode sent to the host device. You can configure prefix/suffix through BaracodaManager software or with the Programming Guide.
There is no prefix/suffix in default settings.
6.5.4 Symbology Prefix / Suffix
A prefix and/or suffix can be added to a specific symbology barcode sent to a host device.
Meaning a certain prefix/suffix will be added while reading a specific symbology.
You can configure prefix/suffix through BaracodaManager software.
There is no “symbology prefix/suffix” in default settings.
Baracoda DualRunners – User Guide v1.7 | - 12 - |
