|
| Data Capture | |
|
| for Workforce | |
|
| in Motion | |
| BCL LED: |
|
|
|
|
|
|
| Single Blinks (e.g. *pause*pause*…) | The scanner is ready to be connected |
|
|
|
|
|
| Double fast Blinks (e.g. **pause**pause**…) | The scanner is connected |
|
|
|
|
|
| The led colour is Green | The Scanner is set in Real Time mode or in Master mode |
|
|
|
|
|
| The Led Colour is Orange | The Scanner is set in Batch mode |
|
|
|
|
|
| The Led Colour is blinking Orange/Green | The Scanner is set in Batch mode, but no barcode is |
|
|
| stored in the memory |
|
|
|
|
|
| RSL LED: |
|
|
|
|
| |
| One Single long Blink (green colour) | The scanner has just read and decoded a barcode or a tag |
|
|
|
|
|
| One Single long Blink (orange colour) | The scanner is set in Master mode and is trying to connect |
|
|
| to the Host address |
|
|
|
|
|
| The Led Colour is blinking Orange | The reader is trying to read a Tag (Smart Autoscan mode) |
|
|
|
|
|
| Double fast Blinks Red | Battery level is low. Please recharge the battery |
|
|
| immediately |
|
|
|
|
|
| One Single long Blink Red + Green (solid) | The scanner is charging |
|
|
|
|
|
| Green (solid) | The scanner is fully charged |
|
|
|
|
|
Special cases:
Both LEDs blinks orange
The scanner is set in the “Real Time with No Data Loss mode” but with no bufferisation (buffer configured to 0) and is not connected. In this particular situation the RFID antenna and the scanner beam are disabled: impossible to read barcodes/tags in this mode.
Baracoda DualRunners – User Guide v1.7 | - 7 - |
