6. Config uration schemes
6. CONFIGURATION SCHEMES

6.1 Stand alone configuration

Scheme
Image 6-1
One D320PL Digitizer is sufficient to drive one Barco LED wall with four different s ources.
How to set up a D320PL stand alone configuration
1. Connect the RS232 communication port of the local control PC with the COM1 RS232 input port of the
D320PL Digitizer.
2. Connect the LED-WALL / PROJECTOR OUTPUT from the D320PL Digitizer with the display.
3. Provide the available video sources to the D320PL input modu les.
4. Configure the D320PL Digitizer and the Display with the control software ins talled on the local control
PC.

6.2 Chaining configuration

Scheme
Image 6-2
R5976470 D320PL DIGITIZER 13122002 23