6. Config uration schemes

How to set up a D320PL stacking configuration

1. Connect the RS232 communication port of the local control PC with t he COM1 RS232input port of the
first D320PL Digitizer. This Digitizer will act as the master, all following Digit izers are slaves.
2. Connect the LOOP OUT with the LOOP IN of the next stacked D320PL Digitizer. This is necessary to
avoid synchronization problems between the screens
3. Connect the COM3 RS232 output port with the COM1 RS232 input port of the next stacked D32 0PL
Digitizer.
4. Connect the LED-WALL / PROJECTOR OUTPUT withthe one screen.
5. Repeat step 2, 3 and 4 until all D320PL Digitizers are stacked.
6. Provide the available video sources to the input modules of one of the D320PL Di gitizers and use the
active loop through to connect the sources with the other stacked D320PL Digitizers. Make sur e the
same input source is used for the same input slot number on the different Di gitizers.
7. Configure the D320PL Digitizers and the Display with the cont rol software installed on the local control
PC.
6.4 Combined chained and stacked configuration

Scheme

Image 6-4
It is possible to stack several chained D320PL Digitizers in order to create a larger display with more than
4 windows. On condition that each ch ain int he stacked configuration has the same number of D320PL
Digitizers.
R5976470 D320P L DIGITIZER 13 122002 25