VFS
Description: Video Format Settings
Required parameters: | |
--con (connector) | , for input video format |
--och (output channel) | , for output video format |
--itype (input type) | , for commands to DVI Input settings |
Parameters: | |
--con (connector) | : 0-5, see below for input connector numbers. |
--och (output channel) | : 0-1, for output commands |
--itype (input type) | : 0 = digital, 1 = analog |
--new (new format name) | : Use "" around the format name. Use |
VFSTDLIST to get the standard format names. This command option changes the format to "new format name".
--enum (new format enum) : Use VFSTDLIST to get the video format numbers.
--reset (reset to default timing based from format table)
--name (format name) :This command option simply renames the current format.
--hsync (horizontal sync) --hact (horizontal active) --hfp (horizontal front porch) --hpos (horizontal position) --htot (horizontal total) --vsync (vertical sync) --vact (vertical active)
--vfp (vertical front porch) --vpos (vertical position) --vtot (vertical total)
Connectors:
0=DVI
1=HD15
2=HDMI
3=DP
4=SDI1
5=SDI2 (available when Dual option mezzanine installed)
| | | |
Query Format: VFS | --? | |
Query Response: | Video Format settings in the following format: |
VFS -- | name "format name" --hsync (hsync) -- | hact (hact) --hfp (hfp) --htot |
(htot) -- | vsync (vsync) --vact (vact) --vfp (vfp) | --vtot (vtot) |
VIDCOL
Description: Video Color Settings for Input / Output
Required parameters: | |
--con (connector) | , for input video color |
--och (output channel) | , for output video color |
--itype (input type) | , for commands to DVI input settings |
26-0904001-00 Rev 00.00 | 17 |
