Parameters: | | | |
--con (connector) | | : 0-5, see below for connector numbers. |
--och (output channel) | : 0-1 |
--itype (input type) | | : 0 = digital, 1 = analog |
--brt (overall brightness) | : [50..150] |
--cbrt (individual brightness) : [50..150] |
--cnt (overall contrast) | : [50..150] |
--ccnt (individual contrast) | : [50..150] |
--col (color) | (must be supplied for --cbrt or --ccnt parameters) |
0 | = all color | | |
1 | = red | | |
2 | = green | | |
3 | = blue | | |
--sat (saturation) | | : [0..125] |
--hue (hue) | | : [-90..90] |
--cinv (color invert) | | : 0 = Normal, 1 = Inverted Color |
--csp (colorspace) | | : 0 = RGB, 1 = YUV |
--gamma (gamma) | | : 0.3 - 3.0 |
--mono (monochrome) | : 0 = Normal, 1 = Monochrome |
Query Format 1 (Input): VIDCOL --con (connector) --?
Query Response 1 : Video Color Settings in the following format
VIDCOL --brt (ovr bright) --cbrt (R bright) (G bright) (b bright) --cnt (ovr contr) --ccnt (R contr) (G contr) (B contr)
--sat (saturation) --hue (hue) --cinv (invert) --csp (colorspace) --gamma (gamma) --mono (monochrome)
Query Format 2 (Output): VIDCOL --och (output channel) --?
Query Response 1 : Video Color Settings in the following format
VIDCOL --brt (ovr bright) --cbrt (R bright) (G bright) (b bright) --cnt (ovr contr) --ccnt (R contr) (G contr) (B contr)
--sat (saturation) --hue (hue) --cinv (invert) --csp (colorspace) --gamma (gamma) --mono (monochrome)
Connectors:
0=DVI
1=HD15
2=HDMI
3=DP
4=SDI1
5=SDI2 (available when Dual option mezzanine installed)
VIEW
Description: View Settings
Required parameters: | |
--con (connector) | |
--ch (channel) | , required for --percent or --pixel parameters |
not required for --units or --save or --recall or --reset |
Parameters: | |
--con (connector) | :0-5, see below for input connector numbers. |
26-0904001-00 Rev 00.00 | 18 |
