4. Stacking C LM projectors
Inclination
Image4-6
Inclinationadjustment
5. If necessary, adjust the skew of the stacked projector with respect to the reference projector by turning the screw on the right
frontside. Adjustuntil the outline of the hatch pattern is most symmetric with the reference hatch pattern.

Skew

Q
Image4-7
Skewadjustment
6. Shift the hatch pattern horizontally and vertically until the outline of the hatch pattern is most symmetrically placed with respect
to the referenceh atch pattern.
Note: Note that the “Shift” functionis m otorized, which means that you have to access the projector software, via the local
keypador remote control unit, to operate the “Shift” function.

Shift

Image4-8
Shiftadjustment
7. Zoom the hatch pattern in or out until the outline of the hatch pattern matches exactly the outline of the reference hatch pattern.
Note: Note thatthe “Zoom” functionis motorized, which means that you have to ac cess the projectorsoftware, via the local
keypador remote control unit, to operate the “Zoom” function.
Zoom
Image4-9
Zoomadjustment
34 R59770057 CLM HD8 15/03/2010