Barco R59770057, R9050130, R90501301, R90501305 About motor control (channel 6 and 7)

13. Project or control
TheDMX monitor window opens. Dependingon the DMX mode, the Normal view or the Simpleview of the DMX monitor window
opens.
Image13-46
Image13-47
Image13-48
Image13-49
Image13-50
Whenselecting DMX monitor and no DMX device is connected, the message “No DMX data, check connection
<ENTER>to display channels” appears o n the screen. When ENTER is pressed the same window appears as
DMX Monitor but without values.
About motor control (channel 6 and 7)
Ifchannel #6 is brought to 32 or more, this is the same as “motor” forward (as pushing the button on the side panel). It also disables
control of channel 7.
Ifchannel #7 is brought to 32 or more, this is the same as “motor” reverse (as pushing the button on the side panel). It also disables
control of channel 6.
Both channels above 32 means no action.
Channel 6 and 7:
0 - 31 No action
31- 2 55 Action start
146 R59770057 CLM HD8 15/03/2010