6. Main Menu
6.2.1 Starting up the image controls
To start up
1. Push the cursor key ↑or ↓to select Image Control. (menu 6-1)
The selected item will change in color and a marker will be displayed in front of it.
2. Press ENTER to select.
The Image Control menu will be displayed. (menu 6-2)
MAIN MENU
Image control
Iris control
Sound control
Function keys
Service menus
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu 6-1
IMAGE CONTROL
Image Processing
Color Adjust
Format Select
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu 6-2
6.2.2 Line Multiplier
Overview
• Changing the Multiplier setting
• Multiplier mode
• Motion Processing On/Off
• Video Equalizing
• Noise Reduction
• Contrast Enhancement
6.2.2.1 Changing the Multiplier setting
Line multiplying is only possible for Video, S-Video, Component Video images on standard line frequency and
RGB signals on 15 kHz.
The setting of the line multiplier will be saved together with the source number. Each time this source number
is selected, the last saved version will be loaded.
Why line multiplying
If a line multiplier is built in and in the ON state, video images can be displayed with different line and frame rates. That will improve
the video image quality.
How to change the Multiplier setting
1. Push the cursor key ↑or ↓to select Image Processing. (menu 6-3)
2. Press ENTER to select the Image Processing menu.
The Image Processing menu will be displayed. (menu 6-4)
IMAGE CONTROL
Image Processing
Color Adjust
Format Select
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu 6-3
IMAGE PROCESSING
Line Multiplier : ON
Multiplier Mode
Motion Processing : ON
Video Equalizing
Noise Reduction
Contrast Enhancement
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu 6-4
34 R5976584 BARCO CINE7 26022003