Sharp MD-MT180H operation manual Error Messages, E-37, References, 01/10/5 180H E 6.fm

MD-MT180H

ENGLISH

Error Messages

References	Error Messages-
	-

ERROR MES-	MEANING
SAGES
BATT EMPTY	The battery has run down.
BLANK MD	Nothing is recorded.
	(Replace the disc with a recorded disc.)
Can't COPY	You tried to record from a copy prohib-
	ited MiniDisc.
	(Record using the analogue cable.)
	You tried to record signals other than
	music (such as data).
Can't EDIT	A track cannot be edited.
	(Change the stop position of the track and
	then edit it.)
Can't PLAY	You tried to play back a track that can-
	not be played with this equipment.
Can't READ (*)	￿The disc data cannot be read because
	the disc is damaged.
	(Reload the Minidisc or replace it with an-
	other one.)
Can't REC	￿Recording cannot be performed cor-
	rectly due to vibration or shock.

ERROR MES-	MEANING
SAGES
Can'tSTAMP	Stamp function does not work.
	(Check the number of tracks.)
Can'tWRITE	Cannot save the TOC information cor-
	rectly to a MiniDisc.
DEFECT!	￿The disc is scratched.
	(If the recorded sound is not right, retry
	recording or replace the disc with a re-
	cordable one.)
DISC FULL	The disc is out of recording space.
Er-MD (**)	￿The microprocessor has reported a
	system fault and the unit is out of or-
	der.
	(To have it repaired, go to the distributor
	where you purchased the unit.)
HOLD	The unit is in the hold mode.
LOCKED	￿You removed a MiniDisc whilst record-
	ing or editing.
	(Turn off the power before removing the
	MiniDisc.)
NO DISC	￿A disc has not been loaded.

Number or symbol appears in (*) position.

E-37

01/10/5 180H_E_6.fm