Sharp MD-MT180H operation manual E-38, References, Error Messages, 01/10/5 180H E 6.fm

ERROR MES-	MEANING
SAGES
NO SIGNAL	￿Poor connection of the digital cable.
	No output signal comes out from the
	connected unit to playback.
	(Use the AC power for the connected
	unit.)
	The input signal has improper sam-
	pling frequency.
PLAY MD	You tried to record on a playback-only
	disc.
PROTECTED	The write protection tab of a MiniDisc
	is set to the protected position.
	You tried to record on a playback-only
	disc.
SORRY	￿Since a track number is currently be-
	ing located or updated, the unit cannot
	accept your command.
	(Wait for a while and try the operation
	again.)

ERROR MES-		MEANING
SAGES
TEMP OVER	The temperature is too high.
	(Turn off the power, and wait for a while.)
TOC FORM	￿There is an error in the recording sig-
(**)	nal.
	(Erase all of the tracks, and then record
	again.)
TOC FULL	There is no space left for recording
	character information (track names,
	disc names, etc.).
Tr. Protect	￿The track has been protected from be-
	ing erased.
	(Edit the track with the device on which it
	was recorded.)
? DISC	￿A disc which contains data other than
	music was played.
	(A disc which contains nonmusic data
	cannot￿	be played.)
	There is an error in the signal recorded
	on the disc.

Number or symbol appears in (*) position.

MD-MT180H

ENGLISH

References	Error Messages-
	-

E-38

01/10/5 180H_E_6.fm