Sharp MD-MT180H operation manual To interrupt recording, To stop recording

Models: MD-MT180H

1 45
Download 45 pages 20.45 Kb
Page 13
Image 13

5 Press the MENU/CHRG button repeatedly to select "REC MODE".

6 Press the ENTER/SYNC button.

7 Press the MENU/CHRG button repeatedly to select the recording mode (page 18).

(Stereo recording)

(2 times long recording)

(4 times long recording)

(Monaural recording)

8 Press the ENTER/SYNC button.

The mode will be set automatically after 7 seconds even if the ENTER/SYNC button is not pressed.

9 Press the button to start the MiniDisc unit re- cording.

10Begin playback on the stereo system, the output will be recorded.

Notes:

Changing the volume level whilst recording does not affect the recording.

￿You cannot adjust the bass level whilst recording. Complete the operation within 7 seconds whilst selecting the menus.

To interrupt recording

Press the button.

￿To resume recording, press the button again.

The track number will be increased by one each time the recording is interrupted.

To stop recording

Press the :OFF/HOLD button.

Notes:

Whilst "TOC" appears, the MiniDisc recorded contents

￿have not yet been updated.

To prevent the new recording from being lost, it is not possible to remove the MiniDisc whilst "TOC" is dis- played.

TOC display

To update the recorded contents of the Mini- Disc

Press the :OFF/HOLD button whilst in the stop mode. The power turns off after recorded contents have been updated on the MiniDisc.

MD-MT180H

ENGLISH

Basic Operation -Recording-

E-12

01/10/11 180H_E_3.fm

Page 13
Image 13
Sharp MD-MT180H To interrupt recording, To stop recording, To update the recorded contents of the Mini- Disc