Sharp MD-MT180H Titling a MiniDisc continued, E-29, To add characters, Before stamping

MD-MT180H

ENGLISH

￿Titling a MiniDisc (continued)

Advanced Features -Titling a MiniDisc-

E-29

To add characters

1 Put the unit in the character input mode. (Perform steps 1 - 4 on page 27.)

2 Press the VOL+ or VOL- button to move the cur-

sor to the character before which you want to add a new character.

3 Select the character to add. (Perform steps 5 - 7 on page 27.)

4 Press the MENU/CHRG button.

"TOC" will be displayed. To write the updated con- tents to the MiniDisc, press the :OFF/HOLD but-

￿ton.

You cannot remove the MiniDisc whilst "TOC" is displayed. "TOC" will not disappear until the re- corded contents have been updated.

￿Stamping titles from another MiniDisc

Before stamping

When there are 2 MiniDiscs on which the same tracks are recorded, you can transfer the character information (disc and track names) of the Master MiniDisc to another MiniDisc (for stamping).

1. What is a master MiniDisc?

A recordable MiniDisc that contains tracks and charac- ter information. (You cannot transfer the information from a playback-only MiniDisc.)

2. What is a MiniDisc for stamping?

A MiniDisc that contains the same tracks in the same order as the master MiniDisc. (Make sure that the total number of tracks of the master MiniDisc and the one for stamping are the same.)

01/10/11 180H_E_5.fm