MD-MT180H

ENGLISH

Power Source -Using with the AC Adaptor-

￿

About charging time

After about 3.5 hours have passed, "" will go out. The battery is charged up to 90% if it is completely discharged.

To charge the battery fully, continue charging for about 2 more hours. In this case, you do not need to press the MENU/CHRG button. Even if the MENU/CHRG button is pressed, "" will not appear.

Notes:

Charge the battery within the range of 5°C - 35°C (41°F - 95°F). The unit can be left in the charg- ing state after it is completed. Carry the battery in the supplied case. (Insert the side first.)

Caution:

Use the specified battery AD-N55BT only. Do not charge a battery (nickel-cadmium, alkaline, etc.) other than that specified.

Do not remove the outer cover of

the rechargeable battery. It may cause heat generation, fire, or ex- plosion.

Do not dip the battery in water, do not dispose of it in a fire, and do not take it apart.

If the rechargeable battery terminal is dirty, charging may not start. In such a case, wipe off the dirt with a

￿dry cloth.

Do not disassemble the battery.

Using with the AC Adaptor

Plug the AC adaptor into the wall socket, and then insert the plug on the other end into the DC IN 5V socket.

AC 230V, 50/60Hz

To the DC IN 5V socket

Caution:

Insert the plugs firmly.

When the unit is not in use for extended periods, remove the AC adaptor from the wall socket.

￿Note:

If power failure occurs whilst playing a disc using the AC adaptor, disconnect it from the wall socket. Otherwise, playback may start automatically when electricity resumes.

E-7

01/10/5 180H_E_2.fm

Page 8
Image 8
Sharp MD-MT180H operation manual Power Source -Using with the AC Adaptor