Sharp MD-MT180H Hold Function, Playback continued, Basic Operation -Playback/HoldFunction, E-15

Models: MD-MT180H

1 45
Download 45 pages 20.45 Kb
Page 16
Image 16
Basic Operation -Playback/Hold Function-

MD-MT180H

ENGLISH

Basic Operation -Playback/Hold Function-

￿Playback (continued)

Bass control

Each time the BASS button is pressed, the tone will be switched as follows.

BASS 1

Emphasised slightly.

 

 

BASS 2

Emphasised more.

 

 

BASS 3

Emphasised fully.

 

 

BASS OFF

Cancelled.

 

 

Notes:

You cannot change the bass setting whilst selecting menus.

Reduce the volume before starting to play. MiniDiscs, compared to ordinary cassette tapes, have very little noise. If the volume is adjusted according to your usual expectations of noise, high volume may damage

￿your hearing.

The sound escaping from your earphones may annoy people around you. In particularly crowded places (such as on trains or buses), reduce the volume.

Hold Function

The present operation condition can be kept even if other buttons are accidentally pressed in a place such as a crowded train.

Press the HOLD button for 2 seconds or more.

HoldRelease

If the battery is inserted or the AC adaptor is connected, you can set this function even when the power is turned off.

To cancel the hold mode

Press and hold down the HOLD button for 2 seconds or more whilst the unit is in the hold mode.

"HOLD OFF" will be shown.

If the hold function is active whilst the power is turned off, the power cannot be turned on by mistake and the battery will not be drained.

E-15

01/10/11 180H_E_3.fm

Page 16
Image 16
Sharp MD-MT180H Hold Function, Playback continued, Basic Operation -Playback/HoldFunction, E-15, Bass control