Dect 1802 Qk 7/19/02 3:45 PM Page 7
Only use the batteries supplied or rechargable AA Ni Cad batteries. DO NOT USE STANDARD BATTERIES.
SETTING UP
CHARGING THE HANDSET BATTERIES
Charging of the Handset batteries takes place automatically when the Handset is placed on the Main Base or Additional Charger.
An LED on the side of the Base Station indicates that the Handset is charging.
When first setting up, the batteries should be charged uninterrupted for
In use, it is advisable to return the Handset to the Charge Base to be charged at regular intervals. After fully charging the Handset during setting up, the Handset should never require longer than about six hours to return to its fully charged condition, e.g. overnight. When the battery is fully charged:
•6 Hours talk time
•120 Hours Standby time
DESCRIPTION OF HANDSET KEYS
Talk Key: Pressing 
is equivalent to picking up a conventional telephone.
Memory Key: Used to access Dialling Memories.
Up/Down (Cycle) Key: Some settings offer a series of options, e.g. Five ring styles are offered. These options can be selected either by pressing the appropriate number key or by cycling through the options using
the 
key.
Redial / Pause Key: Recalls and displays the last four telephone numbers called.
Flash / Call Waiting: Used to access call waiting or to access some features of a business PABX
int | Internal Call Key: If you have more than one handset registered on the |
| Main Base, then internal calls may be made between these handsets. |
Program Mode: Used to programme speed dial numbers and telephone settings.
Power / Delete Key: The Power / Delete Key serves three functions on the Handset:
Power On/Off
Last Digit Delete
Program Abort
3
