Dect 1802 Qk 7/19/02 3:44 PM Page 4
Registering a handset to a base unit
Press and hold 
on the Main Base 5 seconds. The Talk LED on the main Base will flash.
Press 
then 
on the handset.
The available main Base numbers (1 to 4) are displayed.
1 2 3 4
Select the first available Base Station number.
As confirmation, the user is prompted for the System PIN number.
The default System PIN (the PIN that the unit arrives with) is 1111 (see page 9) .
Press the 4 Digit Pin number
(default 
)
If this is entered correctly, the Handset will start to search for the Base Station.
If the PIN is incorrect, a single low tone will be heard and another opportunity to enter the PIN is offered.
iii
The Handset will display the Base Station RFPI. (The RFPI is a unique 10 digit number to each Base Station and serves to indicate that a Base Station has been located.)
0 0 2 2 1 1 3 A 9 8
Press 
to accept the RFPI.
Finally a Handset number must be selected. Each Base Station can support up to six Handsets. The available Handset numbers are displayed:
2 3 4 5 6
Select the first available Handset number.
eg. Press 
.
Note: the display shows the Base Station (left) and Handset (right) numbers:
- 1 - | 1 | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To make a call
1.Press 
and listen for the dial tone.
2.Dial phone number.
OR
1.Dial phone number
2.Press 
.
To hang up
Press 
or place the handset back on the base unit.
To answer a call
When handset is on the base unit: Remove handset from the base and speak.
If handset is off the base unit: Pick up handset, press 
and speak.
