Barco R9855510 2.4 B-10 Mobile LED trailer

2. System Overview

Image 2-6

LEDPRo

Overview

• Three universal inputs accept RGBHV/RGBCs/RGsB computer video, component video (STD or HDTV), SVideo, or composite

video with loop-through

• SD SDI/HD-SDI input.

• DVI-I connectors support both universal analog and DVI input with loop-through.

• DVI output connector for Barco LED Display interface.

• Input Video detection and Auto-acquisition. LED-PROTM will auto detect and match input video to stored formats or user

configurations.

• Aspect ratio conversion and adjustments

• Pan and zoom

• Freeze

• 10-Bit processing

• De-interlacing modes: Motion Adaptive and Field to Frame

• 3:2 pulldown detection for NTSC and 2:2 film detection for PAL video sources

• Decodes NTSC, PAL, and SECAM

• Ethernet connector for real-time control

• Vertical lock (Lock to Source) eliminates image tears and other artifacts in scaled motion video by eliminating frame rate con-

version

• 64 independent input configuration memory presets

• Motion adaptive de-interlacing for HDTV inputs

• Low Video Delay

2.4 B-10 Mobile LED trailer

Overview

The B-10 Mobile LED is a mobile outdoor LED display solution. The LED-wall comes in a trailer that can be pulled by a vehicle with

a 3500 kg towing capacity. All electronics are stored properly and compact when traveling. When arriving to the event location The

LED-wall can easily be put out of the trailer by means of a hydraulic mast and simple lever-control. There is no need for trusses and

structures to be set up. The screen can then be turned around 360 degrees, allowing you to adjust the display to face the audience.

R5976956 B-10 MOBILE LED 19/06/2007 13