Barco R9855510 1.2 Important Safety instructions, 1.3 Safety instructions for LED screen setup, 1.4 Safety instruction when driving the trailer

1. Safety instructions

1.2 Important Safety instructions

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• IMPORTANT, plug holder clamps must be locked firmly on all controller units and power boxes to prevent the possible ingress

of fluids or solid particles. Replace damaged clamps immediately.

• Clean only with materials or chemicals that are inert, nonabrasive, noncorrosive and non-marking. Consult the manufacturer

for further advice should any doubts exist regarding any cleaning procedure.

• Do not block ventilation openings. Install in accordance with the manufacturers instructions.

• Do not defeat the safety purpose of the polarized or grounding type plugs/sockets. If the provided sockets / plugs are damaged

then replacement of the defective parts must be undertaken immediately.

• Protect the power/data cords from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus. Replace damaged power/data cords immediately.

• Only use attachments/accessories specified by the manufacturer.

• Disconnect the power to this apparatus during lightning storms or provide suitable additional lightning protection. Unplug this

apparatus when unused for long period of time.

• Refer all servicing to qualified service technicians/personnel. Servicing is required when the B-10 Mobile LED has been dam-

aged in any way, such as hydraulic mast or generator is damaged, the B-10 Mobile LED does not operate normally.

• Use only with systems or peripherals specified by the manufacturer, or sold with the apparatus. Use caution during transporting

to avoid damage by possible tipping.

• Do not make use of the B-10 Mobile LED to climb on the display.

• Do not place a ladder against the display to access the tiles or for other purposes.

• Do not move the trailer when the B-10 Mobile LED display is in the air.

• Do not walk on the roof of the trailer as it has not been designed and reinforced for this purpose.

Overview

• Only trained people are allowed to set up the LED screen

• No people are allowed around or in the trailer during the setup process of the LED Screen.

• Always put the trailer legs out before lifting the screen.

• Always lock the turntable.

• Always use mechanical locks to lock the turntable.

• Maximum wind force = 8 Beaufort. When the wind force is higher than the maximum allowed wind force, bring the screen down

• Always place the safety pins in the mast.

Overview

• Always stick to the local traffic rules.

• Always respect the local motor vehicle inspection for trailer and car.

• Set draw-bar till trailer level.

• Tires pressure: 3,75 bar

• Max weight under coupling: 150 kg

• Maximum driving speed is 90 km/h. Slow down in the bends.

4R5976956 B-10 MOBILE LED 19/06/2007