1. Safety instructions
1. SAFETY INSTRUCTIONS
Overview
• General instructions
• Important Safety instructions
• Safety instructions for LED screen setup
• Safety instruction when driving the trailer
• Important Warnings
• Specific warnings for diesel-fueled generator
• Specific warning for the jockey wheel
1.1 General instructions
Caution
Setup of the B-10 Mobile LED should be performed only after you are thoroughly familiar with all of the proper safety checks and
setup instructions. To do otherwise increases the risk of hazards and injury to the user.
Do not modify and/or replicate any component. Barco uses specific materials and manufacturing processes in order to achieve
mechanical strength of the trailer and hydraulic mast. Consult Barco for assistance with custom applications.
Always follow Barco setup instructions. Contact Barco if you should have any question regarding the safety of an application.
The manufacturer assumes no liability for incorrect, inadequate, irresponsible or unsafe use of systems.
Product care
Barco products must be used in a manner consistent with their design and inspected on a routine basis for security, wear, deforma-
tion, corrosion and any other circumstances that may affect the proper working of the B-10 Mobile LED.
Barco recommends inspections at regular intervals for the B-10 Mobile LED. If a part of the B-10 Mobile LED is found to have
damage, it must be removed for service or replaced immediately.
Under no circumstances are Barco parts repairable by anyone other than Barco.
Owner’s record
The part number and serial number are printed on a labels which are stuck on the respective parts. Record these numbers in the
spaces provided below. Refer to them whenever you call upon your Barco custom service engineer regarding this product.
Name Part number Serial number Supplier
R5976956 B-10 MOBILE LED 19/06/2007 3