User’s Manual
8403-060
Menu Driven Display
1120-445
I.CONTROLLER OPERATION
8/08/05 | 8:45 AM |
ADJUSTING TEMPERATURE (Temporary Override when in Programmable mode) | OUTDOOR | FAN AUTO | |
93° | HEATING | ||
1. | Before you can adjust the temperature, a MODE must be selected. If you are already in a Heating or Cooling mode, then skip to | 73° | AUTO |
| step 5. | ||
|
| SETPOINT | |
2. | To select a MODE, use the keypad arrows to scroll to MODE, and then press the center button ■ on the key pad to enter the |
| |
| HEAT 62 | ||
|
|
| |
|
|
| COOL 85 |
operating mode menu. |
|
|
|
3. Select the desired mode by scrolling up or down, with the arrows ▲▼, and then press the center button ■ on the keypad to |
| ||
RH | TEMP | MODE FAN MENU | |
enter into that mode. |
|
| Figure1 |
4.You are now returned to the Main Menu and Figure 1 is a similar view. NOTE: Outdoor temperature is only displayed if an outdoor sensor is installed.
5.To increase the temperature set point, use the arrow up button ▲. To decrease the set point, use the arrow down button ▼. Press the center
button ■ on the key pad for the new set point to be effective.
