ALARM OUTPUT
Alarm terminal is output connection for applications where alarm signal is desired. This terminal is powered whenever compressor is locked out due to HPC or LPC sequences as described.
NOTE: Both high and low pressure switch controls are inherently automatic reset devices. The high pressure switch and low pressure switch cut out and cut in settings are fixed by specific air conditioner or heat pump unit model. The lockout features, both soft and manual, are a function of the Compressor Control Module.
ADJUSTMENTS
ADJUSTABLE DELAY-ON-MAKE AND DELAY-ON-BREAK TIMER
The potentiometer is used to select
0.5 minute | (30 seconds) | DOB | = | 123 second DOM |
1.0 minute | (60 seconds) | DOB | = | 126 second DOM |
2.0 minute | (120 seconds) | DOB | = | 132 second DOM |
3.0 minute | (160 seconds) | DOB | = | 138 second DOM |
4.0 minute | (240 seconds) | DOB | = | 144 second DOM |
5.0 minute | (300 seconds) | DOB | = | 150 second DOM |
Manual