FIGURE 3
MOUNTING INSTRUCTIONS
49/
NOTE: It is recommended that a bead of silicone caulking be placed behind the side mounting flanges and under the top flashing at the time of installation.
FIGURE 4
ELECTRIC HEAT CLEARANCE
WARNING
Side section view of supply air duct for wall mounted unit showing 1/4 inch clearance to combustible surfaces.
•A minimum of 1/4 inch clearance must be maintained between the supply air duct and combustible materials. This is required for the first 3 feet of ducting.
•It is important to insure that the 1/4 inch minimum spacing is maintained at all points.
•Failure to do this could result in overheat-
ing | the combustible material and may |
result in | fire. |
Manual