INSTALLATION
WARNING
Open and lock unit disconnect switch before installing this accessory to prevent injury or death due to electrical shock or contact with moving parts. Turn thermostat to off.
BASIC INSTALLATION
1.Unpack the ventilator assembly which includes the integral ventilator with attached electrical harness,
2.Remove and save the existing exterior blower access and service access panels (see Figure 1).
3.Remove and discard exhaust cover plate (see Figure 1).
4.In rear of opening towards duct connection, install exhaust opening adaptor plate (included).
FIGURE 1
REMOVAL OF EXTERIOR PANELS
EIFM UNIT
FRONT DOOR
VENT TERMINAL
RIGHT FRONT
CORNER
EXHAUST COVER
PLATE
VENT OPTION
PANEL
Manual | |
Page | 4 of 17 |