Installation Instructions | Section 2 |
Connection to Ice Machine
GENERAL
A | ½” PVC CONDUIT | |
FITTING | ||
|
B | HOSE CLAMPS |
C LOCKNUT
D BUMPER
E | FOAM TAPE |
F BRACKET
SV1635G
Parts Identification
PVC CONDUIT FITTING (A) INSTALLATION
½” LOCKNUT (C)
½” PVC CONDUIT
FITTING (A)
SV1636G
PVC Conduit Fitting (A) Installation
1.Insert the PVC fitting (A) into the AuCS→A and tighten with the lock nut (C).
WARNING
Disconnect the electric power supply to the ice machine at the electrical disconnect before proceeding.
2.If required for access, remove the front, top, and right side panels from the ice machine.
3.Remove the 7/8” access hole plug located on the back of the corner post of the ice machine
4.Insert the PVC conduit fitting (Part A) and tighten with the lock nut (Part C).