Manitowoc Ice Q 2-12, Determine Type Of Solution Needed, Installing Bottle Of Solution, Section

Models: Q

1 28
Download 28 pages 13.75 Kb
Page 20
Image 20
Determine Type Of Solution Needed

Installation Instructions

Section 2

Determine Type Of Solution Needed

MANITOWOC ICE MACHINE CLEANER Part Number 94-0546-3 CAUTION

Use only Manitowoc-approved Ice Machine Cleaner (part number 94-0546-3) or Sanitizer (part 94-0565-3) in the AuCSA It is a violation of Federal law to use these solutions in a manner inconsistent with their labeling. Read and understand all labels on the bottles before use.

The AuCSA accessory will dispense Cleaner OR Sanitizer. It cannot dispense both at the same time.

MANITOWOC ICE MACHINE SANITIZER Part Number 94-0565-3 CAUTION

Do not mix Cleaner and Sanitizer solutions together. It is a violation of Federal law to use these products in a manner inconsistent with their labeling.

MANITOWOC ICE MACHINE CLEANER Part Number 94-0546-3

Ice Machine Cleaner is used to control build-up and to remove lime scale or other mineral deposits. It will not “sanitize” the ice machine.

It is recommended for use in places that have lime scale or other mineral deposits built up, but no problems with slime.

MANITOWOC ICE MACHINE SANITIZER Part Number 94-0565-3

Ice Machine Sanitizer is used for sanitizing and controlling algae build-up (slime) and other bacterial growth. The ice machine should be sanitized on a regular schedule, following Manitowoc recommendations and local regulations.

It is recommended for use in places such as pizzerias, bars, bakeries, etc., that have airborne bacteria (yeast). Sanitizing is also recommended in places that do not have lime scale (or other mineral deposit problems).

Model

Amount of Cleaner or

Sanitizer Dispensed

 

Q200 Q280 Q320 Q370 Q420

 

Q450 Q600 Q600C IB600C

*2.4 ounces (70 ml)

Q800 Q800C IB800C Q1000

 

Q1000C IB1000C SU1000C

 

Q1400C

 

Q1300 Q1600 Q1800 QDUAL

*4.8 ounces (140 ml)

*The dispense rate is automatically controlled

Installing Bottle Of Solution

Installing Bottle Of Solution WARNING

Wear rubber gloves and safety goggles (and/or face shield) when handling Cleaner or Sanitizer.

Bottle Installation CAUTION

Follow instructions listed under “Changing Solution Type” on the next page when changing from Cleaner to Sanitizer or from Sanitizer to Cleaner.

1.Place the bottle into the AuCSA accessory.

2.Slide the tube to the bottom of the bottle and hand-tighten the cap.

TUBE MUST BE CLOSE

TO BOTTLE BOTTOM

SV1645

Bottle Installation

2-12 WARNING

Do not use 1 gallon bottles of Cleaner or Sanitizer on the AuCSA

2-12

Page 20
Image 20
Manitowoc Ice Q 2-12, Determine Type Of Solution Needed, Installing Bottle Of Solution, Bottle Installation, Section