Figure 16. Tighten setscrews to secure headstock.
Figure 17. Installing handles.
Figure 17b. Installing a light bulb.
3.Tighten the two setscrews in Figure 16 to secure the headstock to the column
Handles | ASSEMBLY |
|
Three handles are supplied with your new Drill Press. Thread them into the hub. Figure 17.
Unplug the drill press before replacing the light bulb. Failure to do this may result in serious per- sonal injury.
Installing Light Bulb
The Shop Fox® 17" Drill Press is fitted with a light socket that accommodates standard sized bulbs.
Use only bulbs that are “safety coated” and shatter resistant. The bulb will be exposed at the bottom of the head casting which helps with illumination. Impacts with a bulb not “safety coated” may shatter, exposing the electrical filaments and creating an electrical shock hazard.
Before installing a light bulb, unplug the drill press. Secure bulb in opening behind the spindle as in Figure 17b.
