WARRANTY AND RETURNS
Woodstock International, Inc. warrants all SHOP FOX® machinery to be free of defects from workman- ship and materials for a period of 2 years from the date of original purchase by the original owner. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, lack of maintenance, or to repair or alterations made or specifically authorized by anyone other than Woodstock International, Inc.
Woodstock International, Inc. will repair or replace, at its expense and at its option, the SHOP FOX® machine or machine part which in normal use has proven to be defective, provided that the original owner returns the product prepaid to the SHOP FOX® factory service center or authorized repair facility designated by our Bellingham, WA office, with proof of their purchase of the product within 2 years, and provides Woodstock International, Inc. reasonable opportunity to verify the alleged defect through inspection. If it is determined there is no defect, or that the defect resulted from causes not within the scope of Woodstock International Inc.'s warranty, then the original owner must bear the cost of storing and returning the product.
This is Woodstock International, Inc.'s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. We do not warrant that SHOP FOX® machinery complies with the provisions of any law or acts. In no event shall Woodstock International, Inc.'s liability under this war- ranty exceed the purchase price paid for the product, and any legal actions brought against Woodstock International, Inc. shall be tried in the State of Washington, County of Whatcom. We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special or consequen- tial damages arising from the use of our products.
Every effort has been made to ensure that all SHOP FOX® machinery meets high quality and durability standards. We reserve the right to change specifications at any time because of our commitment to con- tinuously improve the quality of our products.
Machine Specifications
Capacities: |
|
Spindle Travel | 31⁄4'' |
Max. Distance, Spindle to Base | 49'' |
Max. Distance, Spindle to Table | 311⁄2'' |
Spindle Taper | MT #3 |
Swing | 17'' |
Chuck Size | 5⁄8'' (16mm), keyed |
Speeds | 12 |
Range of Speeds | 150, 260, 320, 380, 480, 540, 980, 1160, 1510, 1650, 2180, 3050 RPM |
Drilling Capacity | 3⁄4'' Diameter in Steel |
Motor: |
|
Type | TEFC Capacitor Start Induction |
Horsepower | 1 HP |
Phase ⁄ Cycle | Single Phase ⁄ 60 Hz |
Amps | 10 |
Voltage | 110V Only |
RPM | 1720 |
Power Transfer | |
Bearings | Shielded & Lubricated Ball Bearings |
Switch | Toggle ON/OFF Switch, w/ Safety Lock Tab |
INTRODUCTION
