| MAINTENANCE |
General | Table And Base |
Disconnect power to the machine when perform- ing any maintenance or repairs. Failure to do this may result in serious per- sonal injury.
Regular periodic maintenance on your Model W1680 Drill Press will ensure its optimum per- formance. Make a habit of inspecting your drill press each time you use it. Check for the fol- lowing conditions and repair or replace when necessary.
1.Loose mounting bolts.
2.Worn switch.
3.Worn or damaged cords and plugs.
4.Damaged drive belts.
5.Any other condition that could hamper the safe operation of this machine.
Tables can be kept
Lubrication
Since all bearings are shielded and permanently lubricated, simply leave them alone until they need to be replaced. Do not lubricate them.
For other items on this machine, such as the quill, table and column, an occasional applica- tion of light machine oil is all that is necessary. Before applying lubricant, clean off sawdust and metal chips.
Your goal is to achieve adequate lubrication. Too much lubrication will attract dirt and saw- dust. Various parts of your machine could loose their freedom of movement as a result.
MAINTENANCE
