Intel P4LA 2.10 <Audio Installation>

P4LA User’s Manual Hardware Setup

Audio Installation 23

2.10 <Audio Installation>

The board integrates onboard audio interface with REALTEK ALC880 codec, with Intel next

generation of audio standard as High Definition Audio, it offers more vivid sound and other

advantages than former AC97 audio compliance.

The main specifications of ALC880 are:

 High-performance DACs with 100dB S/N ratio

 8 DAC channels support 16/20/24-bit PCM format for 7.1 audio solution

 16/20/24-bit S/PDIF-OUT supports 44.1K/48K/96kHz sample rate

 Compatible with AC'97

 Meets Microsoft WHQL/WLP 2.0 audio requirements

The board provides 7.1 channels audio phone jacks on rear I/O port, and amplified speaker

out and Line-in/MIC-in ports for front I/O panel through optional cable.

CDIN

CN_AUDIO

LINE-IN

LINE-OUT

MIC-IN

Rear I/O phone jacks

Cente

Rear Speake

Side Speake

Contents

Main Page Packing List Index Chapter1 <Introduction> Chapter 2 <Hardware Setup> Chapter 3 <System Configuration> Chapter 4 <BIOS Setup> Appendix A <I/O Port Pin Assignment> Appedix B <System Resources> Appedix B <How to setting RS-422/485> Appedix C <Flash BIOS> Appendix D <Programming GPIOs> Appendix E <What Dog timer Setting > Contact Information Page Chapter1 <Introduction> 1.1 <Product Overview> Intel LGA775 processor Intel 945G and ICH7R chipset One Marvell E8053 1.2 <Product Specification> General Specification Page P4LA Users Manual Introduction Component Placement 10 1.3 <Component Placement> 1.4 <Block Diagram> ICH7R 1.5 <Mechanical Drawing > P4LA Users Manual Hardware Setup Connector Location 13 Chapter 2 <Hardware Setup> 2.1 <Connector Location> 2.2 <Jumper Reference> 2.3 <Connector Reference> 2.3.1 <Internal Connectors> 2.3.2 <External Connectors> 2.4 <CPU and Memory Setup> 2.4.1 <CPU installation> 2.4.2 <Memory installation> 2.5 <CMOS Setup> 2.6 <Enhanced IDE interface> 2.7 <Serial ATA installation> Page Page 2.10 <Audio Installation> Page 2.11 <Display Installation> 2.12 <USB Installation> Page 2.13 <Power and Fan Installation> Page 2.14 <GPIO interface> 2.15 <Serial Port> 2.16 <Switch and Indicator> 2.17 <Expansion Interface> Page Chapter 3 <System Configuration> 3.1 <SATA configuration> X X Page On-Chip Serial ATA mode: 3.2 <SATA RAID Configuration> Page Page Page Page 3.4 <Video Memory Setup> Page 3.5 <Display Properties Setting> Page Chapter 4 <BIOS Setup> Page Appendix A <I/O Port Pin Assignment> A.1 IDE Port 39 A.2 <Serial ATA Port> A.3 <Floppy Port> A.4 <IrDA Port> A.5 <Serial Port> A.6 <VGA Port> A.7 <LAN Port> A.8 <SMBus> A.9 <LPT Port > Appedix B <System Resources> Page B2.<Memory Address Map> Page Appedix B <How to setting RS-422/485> Appedix C <Flash BIOS> C.1 BIOS Auto Flash Tool C.2 Flash Method Appendix D <Programming GPIOs> Appendix E <What Dog timer Setting > Contact Information Taiwan Commate Computer Inc.