Intel P4LA - page 9

P4LA User’s Manual Introduction

Product Specification 9

Ethernet Interface

Chipset 10/100/1000MT LAN interface with Marvell E8053

Type 10Base-T / 100Base-TX/1000Base-T,

auto-switching Fast Ethernet

Full duplex, IEEE802.3U compliant

Connector one External RJ45 connectors with LED on rear I/O panel

Audio Interface

Chipset Intel® ICH7R with Realtek® ALC880 codec

Intel High Definition Audio compliance

Interface 7.1 channels sound output

Connector External Audio phone jack for Line-out, Line-in, MIC-in,

Surround, Center and Backsurround

Onboard audio connector with pin header (built-in amplifier for

speaker out)

Onboard CD-IN and S/PDIF connector

Expansive Interface

PCI-Express One x16 PCI-Express slot (compatible with x1 slot)

One x4 PCI-Express slot

One x1 PCI-Express slot

Up to 8GB/s of transfer bandwidth

Power supply: +3.3V, +12V

PCI Four-PCI slot (32-bit, 33MHz)

Power supply: +3.3V, +5V

ISA One ISA slot

Power and Environment

Power

Requirement

Standard ATX 24-pin (20-pin is compatible) power supply

Additional +12V 8-pin(4-pin is compatible) power connector

Dimension 307mm x 244mm (L x W)

Temperature Operating within 0 ~ 60oC (32 ~ 140oF)

Storage within -20 ~ 85oC (-4 ~ 185oF)

Ordering Code

P4LA Support Intel Pentium 4 LGA775 with DDRII, Onboard VGA, One

Marvell Gigabit LAN ,8 x USB2.0, Realtek ALC880 HD Audio, 6 x

COM Ports, GPIO, SATA, CF and ISA slot.

The specifications may be different as the actual production.

For further product information please visit the website at http://www.comm ell.com.tw

Contents

Main Page Packing List Index Chapter1 <Introduction> Chapter 2 <Hardware Setup> Chapter 3 <System Configuration> Chapter 4 <BIOS Setup> Appendix A <I/O Port Pin Assignment> Appedix B <System Resources> Appedix B <How to setting RS-422/485> Appedix C <Flash BIOS> Appendix D <Programming GPIOs> Appendix E <What Dog timer Setting > Contact Information Page Chapter1 <Introduction> 1.1 <Product Overview> Intel LGA775 processor Intel 945G and ICH7R chipset One Marvell E8053 1.2 <Product Specification> General Specification Page P4LA Users Manual Introduction Component Placement 10 1.3 <Component Placement> 1.4 <Block Diagram> ICH7R 1.5 <Mechanical Drawing > P4LA Users Manual Hardware Setup Connector Location 13 Chapter 2 <Hardware Setup> 2.1 <Connector Location> 2.2 <Jumper Reference> 2.3 <Connector Reference> 2.3.1 <Internal Connectors> 2.3.2 <External Connectors> 2.4 <CPU and Memory Setup> 2.4.1 <CPU installation> 2.4.2 <Memory installation> 2.5 <CMOS Setup> 2.6 <Enhanced IDE interface> 2.7 <Serial ATA installation> Page Page 2.10 <Audio Installation> Page 2.11 <Display Installation> 2.12 <USB Installation> Page 2.13 <Power and Fan Installation> Page 2.14 <GPIO interface> 2.15 <Serial Port> 2.16 <Switch and Indicator> 2.17 <Expansion Interface> Page Chapter 3 <System Configuration> 3.1 <SATA configuration> X X Page On-Chip Serial ATA mode: 3.2 <SATA RAID Configuration> Page Page Page Page 3.4 <Video Memory Setup> Page 3.5 <Display Properties Setting> Page Chapter 4 <BIOS Setup> Page Appendix A <I/O Port Pin Assignment> A.1 IDE Port 39 A.2 <Serial ATA Port> A.3 <Floppy Port> A.4 <IrDA Port> A.5 <Serial Port> A.6 <VGA Port> A.7 <LAN Port> A.8 <SMBus> A.9 <LPT Port > Appedix B <System Resources> Page B2.<Memory Address Map> Page Appedix B <How to setting RS-422/485> Appedix C <Flash BIOS> C.1 BIOS Auto Flash Tool C.2 Flash Method Appendix D <Programming GPIOs> Appendix E <What Dog timer Setting > Contact Information Taiwan Commate Computer Inc.