Intel P4LA - page 36

P4LA User’s Manual System Configuration

SATA Configuration 36

SATA Mode:

This option can let you select whether the Serial ATA hard drives would work under normal

IDE mode or RAID mode. The RAID mode need more than one HDD is applied.

Once you enable the RAID mode, the boot-up screen would pop up the RAID configuration

option for setup.

Contents

Main Page Packing List Index Chapter1 <Introduction> Chapter 2 <Hardware Setup> Chapter 3 <System Configuration> Chapter 4 <BIOS Setup> Appendix A <I/O Port Pin Assignment> Appedix B <System Resources> Appedix B <How to setting RS-422/485> Appedix C <Flash BIOS> Appendix D <Programming GPIOs> Appendix E <What Dog timer Setting > Contact Information Page Chapter1 <Introduction> 1.1 <Product Overview> Intel LGA775 processor Intel 945G and ICH7R chipset One Marvell E8053 1.2 <Product Specification> General Specification Page P4LA Users Manual Introduction Component Placement 10 1.3 <Component Placement> 1.4 <Block Diagram> ICH7R 1.5 <Mechanical Drawing > P4LA Users Manual Hardware Setup Connector Location 13 Chapter 2 <Hardware Setup> 2.1 <Connector Location> 2.2 <Jumper Reference> 2.3 <Connector Reference> 2.3.1 <Internal Connectors> 2.3.2 <External Connectors> 2.4 <CPU and Memory Setup> 2.4.1 <CPU installation> 2.4.2 <Memory installation> 2.5 <CMOS Setup> 2.6 <Enhanced IDE interface> 2.7 <Serial ATA installation> Page Page 2.10 <Audio Installation> Page 2.11 <Display Installation> 2.12 <USB Installation> Page 2.13 <Power and Fan Installation> Page 2.14 <GPIO interface> 2.15 <Serial Port> 2.16 <Switch and Indicator> 2.17 <Expansion Interface> Page Chapter 3 <System Configuration> 3.1 <SATA configuration> X X Page On-Chip Serial ATA mode: 3.2 <SATA RAID Configuration> Page Page Page Page 3.4 <Video Memory Setup> Page 3.5 <Display Properties Setting> Page Chapter 4 <BIOS Setup> Page Appendix A <I/O Port Pin Assignment> A.1 IDE Port 39 A.2 <Serial ATA Port> A.3 <Floppy Port> A.4 <IrDA Port> A.5 <Serial Port> A.6 <VGA Port> A.7 <LAN Port> A.8 <SMBus> A.9 <LPT Port > Appedix B <System Resources> Page B2.<Memory Address Map> Page Appedix B <How to setting RS-422/485> Appedix C <Flash BIOS> C.1 BIOS Auto Flash Tool C.2 Flash Method Appendix D <Programming GPIOs> Appendix E <What Dog timer Setting > Contact Information Taiwan Commate Computer Inc.