Intel P4LA 3.5 <Display Properties Setting>

P4LA User’s Manual System Configuration

Display Properties Setting 45

3.5 <Display Properties Setting>

Based on Intel 945G GMCH with GMA 950 (Graphic Media Accelerator), the board supports

two DACs for display device as different resolution and color bit.

Please install the Intel Graphic Driver before you starting setup display devices.

1. Click right button on the desktop to lunch display properties

2. Click Advanced button for more specificity setup.

Click Graphics Properties... for

advanced setup

Contents

Main Page Packing List Index Chapter1 <Introduction> Chapter 2 <Hardware Setup> Chapter 3 <System Configuration> Chapter 4 <BIOS Setup> Appendix A <I/O Port Pin Assignment> Appedix B <System Resources> Appedix B <How to setting RS-422/485> Appedix C <Flash BIOS> Appendix D <Programming GPIOs> Appendix E <What Dog timer Setting > Contact Information Page Chapter1 <Introduction> 1.1 <Product Overview> Intel LGA775 processor Intel 945G and ICH7R chipset One Marvell E8053 1.2 <Product Specification> General Specification Page P4LA Users Manual Introduction Component Placement 10 1.3 <Component Placement> 1.4 <Block Diagram> ICH7R 1.5 <Mechanical Drawing > P4LA Users Manual Hardware Setup Connector Location 13 Chapter 2 <Hardware Setup> 2.1 <Connector Location> 2.2 <Jumper Reference> 2.3 <Connector Reference> 2.3.1 <Internal Connectors> 2.3.2 <External Connectors> 2.4 <CPU and Memory Setup> 2.4.1 <CPU installation> 2.4.2 <Memory installation> 2.5 <CMOS Setup> 2.6 <Enhanced IDE interface> 2.7 <Serial ATA installation> Page Page 2.10 <Audio Installation> Page 2.11 <Display Installation> 2.12 <USB Installation> Page 2.13 <Power and Fan Installation> Page 2.14 <GPIO interface> 2.15 <Serial Port> 2.16 <Switch and Indicator> 2.17 <Expansion Interface> Page Chapter 3 <System Configuration> 3.1 <SATA configuration> X X Page On-Chip Serial ATA mode: 3.2 <SATA RAID Configuration> Page Page Page Page 3.4 <Video Memory Setup> Page 3.5 <Display Properties Setting> Page Chapter 4 <BIOS Setup> Page Appendix A <I/O Port Pin Assignment> A.1 IDE Port 39 A.2 <Serial ATA Port> A.3 <Floppy Port> A.4 <IrDA Port> A.5 <Serial Port> A.6 <VGA Port> A.7 <LAN Port> A.8 <SMBus> A.9 <LPT Port > Appedix B <System Resources> Page B2.<Memory Address Map> Page Appedix B <How to setting RS-422/485> Appedix C <Flash BIOS> C.1 BIOS Auto Flash Tool C.2 Flash Method Appendix D <Programming GPIOs> Appendix E <What Dog timer Setting > Contact Information Taiwan Commate Computer Inc.