Intel P4LA 2.4 <CPU and Memory Setup>

P4LA User’s Manual Introduction

CPU Installation 16

2.4 <CPU and Memory Setup>

2.4.1 <CPU installation>

P4LA has a LGA775 CPU socket onboard; please check following steps to install the

processor properly.

Attention If P4LA need RMA, please Keep CPU socket cover on the CPU Socket.

Warring If CPU Socket internal Pin damage, We could not provide warranty.

Intel® Pentium 4 processor

Package type: 775 pin PLGA

L2 Cache: Up to 2M

FSB: 533/800/1066MHz (266MHz x 4)

Manufacturing: 90nm

Intel Hyper Threading Technology

And Dual core support Check point

1. Lift this bar

2. Uncover this plate

3. Place the CPU on the top o

the

ins

3. Cover this plate

4. Lock this bar

Notice: Please place the CPU on the pins tenderl

to avoid bendin

the pins

Contents

Main Page Packing List Index Chapter1 <Introduction> Chapter 2 <Hardware Setup> Chapter 3 <System Configuration> Chapter 4 <BIOS Setup> Appendix A <I/O Port Pin Assignment> Appedix B <System Resources> Appedix B <How to setting RS-422/485> Appedix C <Flash BIOS> Appendix D <Programming GPIOs> Appendix E <What Dog timer Setting > Contact Information Page Chapter1 <Introduction> 1.1 <Product Overview> Intel LGA775 processor Intel 945G and ICH7R chipset One Marvell E8053 1.2 <Product Specification> General Specification Page P4LA Users Manual Introduction Component Placement 10 1.3 <Component Placement> 1.4 <Block Diagram> ICH7R 1.5 <Mechanical Drawing > P4LA Users Manual Hardware Setup Connector Location 13 Chapter 2 <Hardware Setup> 2.1 <Connector Location> 2.2 <Jumper Reference> 2.3 <Connector Reference> 2.3.1 <Internal Connectors> 2.3.2 <External Connectors> 2.4 <CPU and Memory Setup> 2.4.1 <CPU installation> 2.4.2 <Memory installation> 2.5 <CMOS Setup> 2.6 <Enhanced IDE interface> 2.7 <Serial ATA installation> Page Page 2.10 <Audio Installation> Page 2.11 <Display Installation> 2.12 <USB Installation> Page 2.13 <Power and Fan Installation> Page 2.14 <GPIO interface> 2.15 <Serial Port> 2.16 <Switch and Indicator> 2.17 <Expansion Interface> Page Chapter 3 <System Configuration> 3.1 <SATA configuration> X X Page On-Chip Serial ATA mode: 3.2 <SATA RAID Configuration> Page Page Page Page 3.4 <Video Memory Setup> Page 3.5 <Display Properties Setting> Page Chapter 4 <BIOS Setup> Page Appendix A <I/O Port Pin Assignment> A.1 IDE Port 39 A.2 <Serial ATA Port> A.3 <Floppy Port> A.4 <IrDA Port> A.5 <Serial Port> A.6 <VGA Port> A.7 <LAN Port> A.8 <SMBus> A.9 <LPT Port > Appedix B <System Resources> Page B2.<Memory Address Map> Page Appedix B <How to setting RS-422/485> Appedix C <Flash BIOS> C.1 BIOS Auto Flash Tool C.2 Flash Method Appendix D <Programming GPIOs> Appendix E <What Dog timer Setting > Contact Information Taiwan Commate Computer Inc.