Intel P4LA 3.4 <Video Memory Setup>

P4LA User’s Manual System Configuration

Video Memory Setup 43

3.4 <Video Memory Setup>

Based on Intel® 945G chipset with GMA (Graphic Media Accelerator) 950, the board

supports Intel®DVMT (Dynamic Video Memory Technology) 3.0, which would allow the

video memory be triggered up to 224MB.

To support DVMT, you need to install the Intel GMA 950 Driver with supported OS.

BIOS Setup:

On-Chip Video Memory Size: This option combines three items below for setup.

On-Chip Frame Buffer Size:

This item can let you select video memory which been allocated for legacy VGA and SVGA

graphics support and compatibility. The available option is 1MB and 224MB.

DVMT Memory Size:

This item can let you select a maximum size of dynamic amount usage of video memory,

the system would configure the video memory depends on your application, this item is

strongly recommend to be selected as MAX DVMT.

Contents

Main Page Packing List Index Chapter1 <Introduction> Chapter 2 <Hardware Setup> Chapter 3 <System Configuration> Chapter 4 <BIOS Setup> Appendix A <I/O Port Pin Assignment> Appedix B <System Resources> Appedix B <How to setting RS-422/485> Appedix C <Flash BIOS> Appendix D <Programming GPIOs> Appendix E <What Dog timer Setting > Contact Information Page Chapter1 <Introduction> 1.1 <Product Overview> Intel LGA775 processor Intel 945G and ICH7R chipset One Marvell E8053 1.2 <Product Specification> General Specification Page P4LA Users Manual Introduction Component Placement 10 1.3 <Component Placement> 1.4 <Block Diagram> ICH7R 1.5 <Mechanical Drawing > P4LA Users Manual Hardware Setup Connector Location 13 Chapter 2 <Hardware Setup> 2.1 <Connector Location> 2.2 <Jumper Reference> 2.3 <Connector Reference> 2.3.1 <Internal Connectors> 2.3.2 <External Connectors> 2.4 <CPU and Memory Setup> 2.4.1 <CPU installation> 2.4.2 <Memory installation> 2.5 <CMOS Setup> 2.6 <Enhanced IDE interface> 2.7 <Serial ATA installation> Page Page 2.10 <Audio Installation> Page 2.11 <Display Installation> 2.12 <USB Installation> Page 2.13 <Power and Fan Installation> Page 2.14 <GPIO interface> 2.15 <Serial Port> 2.16 <Switch and Indicator> 2.17 <Expansion Interface> Page Chapter 3 <System Configuration> 3.1 <SATA configuration> X X Page On-Chip Serial ATA mode: 3.2 <SATA RAID Configuration> Page Page Page Page 3.4 <Video Memory Setup> Page 3.5 <Display Properties Setting> Page Chapter 4 <BIOS Setup> Page Appendix A <I/O Port Pin Assignment> A.1 IDE Port 39 A.2 <Serial ATA Port> A.3 <Floppy Port> A.4 <IrDA Port> A.5 <Serial Port> A.6 <VGA Port> A.7 <LAN Port> A.8 <SMBus> A.9 <LPT Port > Appedix B <System Resources> Page B2.<Memory Address Map> Page Appedix B <How to setting RS-422/485> Appedix C <Flash BIOS> C.1 BIOS Auto Flash Tool C.2 Flash Method Appendix D <Programming GPIOs> Appendix E <What Dog timer Setting > Contact Information Taiwan Commate Computer Inc.